Skip to content


Sold out
Price without tax: €369,00 VAT (22%) €81,18 Status: Out of stock

Brand: RC Gadgetz

Tech Specs
Wingspan: 56 inch ( 1422 mm )
Length of fuselage: 50 inches
Wing area: 557.2 in2

All up weight: 1.6-1.7 kg (3.5-3.7 lb)

Prop and Battery :

14x7 recommended for 3s Falcon 14X7E

13x6.5 recommended for 4s Falcon 13X6,5E  with GENS ACE 2500MAH 14.8V

Motor specs:

KV: 1100 Max
Continuous Current: 63.8A/10s Max Continuous
Power: 944W

Input cell number (lipo): 3s-4s


Metal Gear
Speed(8V): 0.09s
Torque (8V): 3.5kg
Bearing Type: Dual Ball Bearing
Horn Type: 25T

Programable ESC: 

2S-4S operation
60A with a burst up to 80A
5Amp/8V Sbec (Deans plug)

Kit Contents
All images below show the SLICK model. This also applies to MXS!

- Fuselage including canopy with pre-installed motor, ESC, LED lights, rudder - elevator servo,
pull-pull cables and elevator pushrod
- Right Wing Panel with pre-installed Aileron, servo, linkages and LED - Left Wing Panel with pre-installed Aileron, servo, linkages and LED
- One piece Horizontal Stabilizer with pre-installed Elevator and LED
- Rudder with hinges pre-glued
- Carbon Fiber Wing Tube
- ABS Plastic Painted Cowl – pre-drilled and aligned with fuse
- Carbon Fiber pre-assembled Landing Gear with wheels and wheel pants
- Tail wheel – pre-installed on fuselage
- Aluminum back plate cooling spinner with adaptor
- Propeller 14 X 7 with prop adaptors
- 2 pieces SFG with spacers
- 6 inches adhesive backed Velcro
- 2 pcs Velcro strap
- Hardware bag (this includes the screws for the Cowl and SFGs and additional spares) - 4 packs of servo arms (these are spare and not needed as all servos are pre- itted with CNC 
aluminum RCG servo arms) - 2 X 10cm servo extensions for Aileron – RX connection - LED one to three lead connector
- Additional stock motor spinner (this is spare)
- C-clamps for motor shaft servicing

Building Manual here


Welcome Newcomer