
54" Slick 560 LED-PNP

Brand: RC Gadgetz
Tech Specs
All up weight: 1.6-1.7 kg
Prop and Battery :
13x6.5 recommended for 4s Falcon 13X6,5E with GENS ACE 2500MAH 14.8V
Motor specs:
Input cell number (lipo): 3s-4s
Servo:
Metal GearSpeed(8V): 0.09s
Torque (8V): 3.5kg
Bearing Type: Dual Ball Bearing
Horn Type: 25T
Programable ESC:
Kit Contents
All images below show the SLICK model. This also applies to MXS!
- Fuselage including canopy with pre-installed motor, ESC, LED lights, rudder - elevator servo,
pull-pull cables and elevator pushrod - Right Wing Panel with pre-installed Aileron, servo, linkages and LED - Left Wing Panel with pre-installed Aileron, servo, linkages and LED
- One piece Horizontal Stabilizer with pre-installed Elevator and LED
- Rudder with hinges pre-glued - Carbon Fiber Wing Tube
- ABS Plastic Painted Cowl – pre-drilled and aligned with fuse
- Carbon Fiber pre-assembled Landing Gear with wheels and wheel pants
- Tail wheel – pre-installed on fuselage
- Aluminum back plate cooling spinner with adaptor
- Propeller 14 X 7 with prop adaptors
- 2 pieces SFG with spacers
- 6 inches adhesive backed Velcro
- 2 pcs Velcro strap
- Hardware bag (this includes the screws for the Cowl and SFGs and additional spares) - 4 packs of servo arms (these are spare and not needed as all servos are pre- itted with CNC aluminum RCG servo arms) - 2 X 10cm servo extensions for Aileron – RX connection - LED one to three lead connector
- Additional stock motor spinner (this is spare)
- C-clamps for motor shaft servicing